Autograph cards, DL
Data sheet Autograph cards, DL
Data format (incl. 2.00 mm bleed): 10.90 x 21.40 cm
Trimmed size: 10.50 x 21.00 cm
Resolution at least 300 dpi for an original image size of.
Include a surrounding trim of 2 mm, important information should be at least 4 mm from the edge of the final format size
Fonts must be completely imbedded or converted to curves.
colour mode CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
Maximum colour application of 300%
We will not check for spelling and/or typographical errors.
Please pay attention to the reading direction when creating your print files
We will not check for overprint settings.
Transparencies created with CorelDRAW must be reduced.
Comments will be deleted and not printed.
Form field content will be printed.
Double-sided colour print (4/4)
Wide range of paper stocks available
300 gsm art print paper: matt water-based paint applied on both sides
400 gsm art print paper: matt water-based paint applied on both sides
280 gsm chromo-sulfate board: front glossy, back untreated (writable)
250 gsm offset paper: both sides untreated, to be written
300 gsm recycled board (100% recycled paper, "Blue Angel" environment seal): with
1.3 times volume and excellent opacity
printed products on recycled paper are carbon neutral at no extra cost - learn more .
Numbering and perforation can be found in our event tickets category.
Please note that additional options may extend the production time.