Hinged lid boxes, Free format selection
Artwork information Hinged lid boxes, Free format selection
Free format selection
Resolution at least 300 dpi for an original image size of.
Include a surrounding trim of 3 mm, important information should be at least 4 mm from the edge of the final format size
Maximum colour application of 300%
Fonts must be completely imbedded or converted to curves.
colour mode CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
The print design must protrude 3 mm into the inner edge of the adhesive flap (overfill); the rest of the adhesive flap must remain unprinted.
Black elements must be created with 100 % black only (e.g. barcodes such as EAN, QR-codes, text etc.)
We will not check for spelling and/or typographical errors.
We will not check for overprint settings.
Transparencies created with CorelDRAW must be reduced.
Comments will be deleted and not printed.
Form field content will be printed.
Product details
Single-sided colour print (4/0) back blank
hinged lid boxes with large opening, ideal for flat products
with click closure on the inside and tuck flap on the outside; no glue needed
standard: ECMA B2150 B / B20.01.00.50
easy to open and close again thanks to large lid
easy to fill
easy to stack and therefore ideal for transport and presentation
Packaging can be printed all over as information and/or advertising space.
delivered flat, not assembled
How to assemble:
1) Fold up the front and rear panel,
2) folding their lateral flaps inwards to form a frame.
3) Put the side panels over and press them into the slots inside the box.
4) Fold the large flaps on the lid inwards and push them into the box.
5) Insert the closing flap, i.e. the small flaps on the lid, into the openings of the side panels.