Artwork information Beer mats with blind embossing, hexagon, 10 x 8.7 cm, 4/4
- Data format (incl. 3 mm bleed): 10,6 x 9,3 cm
- Trimmed size: 10 x 8,7 cm
- Special requirements for creating the artwork:
- for finishes there are specific requirements
- here we show you how to set up your artwork with spot finish in InDesign
- in order to avoid the image to be printed upside down on the finished product, the artwork should take the text direction into account
- Resolution: 300 dpi
- Include a surrounding trim of 3 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- Maximum colour application of 300 %
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Transparencies created with CorelDRAW must be reduced
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- Four-colour print on the front and reverse (4/4)
- Individual elements are pressed into the material using blind embossing, creating a relief-like structure. The elements to be embossed can be specified via spot colour (see Artwork information", "Finishing" section).
- punched and shrink-wrapped
- Note: Printing is made on both sides; embossing, however, is possible on one side only.