Cardboard Cups, 200 ml
Artwork information Cardboard Cups, 200 ml
- Data format (incl. 3 mm bleed): 24,3 x 9,7 cm
- Trimmed size: 23,7 x 9,1 cm
- please pay attention to the following aspects when creating the artwork:
- Marking specifications: Please insert the word mark/figurative mark "PLASTIC IN PRODUCT" in your artwork. It is available for download in the "More templates" section on the right
- Important: Please observe the statutory marking specifications (Annex IV, Item 3)
- Minimum size of the imprint: 1.4 cm x 2.8 cm
- Position: on the outside of the cup with distance to the upper edge
- Do not rotate the label (put it on edge) or position it on the underside (bottom of the cup)
- please bend your text/graphics along the curves
- Black design elements: Please create as monochrome black (C0 M0 Y0 K100) to avoid register inaccuracies (if necessary, use C60 M0 Y0 K100 for jet black)
- name the layers containing your design "ARTWORK"
- please assign the name "KEYLINE/CUTTING LINE” to the layer containing the keyline/cutting line
- Marking specifications: Please insert the word mark/figurative mark "PLASTIC IN PRODUCT" in your artwork. It is available for download in the "More templates" section on the right
- Resolution: 300 dpi
- Include a surrounding trim of 3 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper
- Maximum colour application of 300 %
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Transparencies created with CorelDRAW must be reduced
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- four-colour print on the outside, inside unprinted (4/0)
- disposable cardboard cups with a sturdy double wall
- ideal to enjoy cold or hot beverages"to go"
- capacity: approx. 200 to 220 ml
- cup diameter: top: 80 mm; bottom: 57 mm
- cup height: 90 mm
- packaging unit: 25 pieces in a polyester bag
- food-safe, odourless and tasteless
- Marking specifications: Cups containing plastic and distributed in the EU must be printed with the combined word/figurative mark “PLASTIC IN PRODUCT”
